Coach 2013 Annual Report Download - page 218

(k) The Parking Unit, the Retail Unit, Office Unit 1, Office Unit 2A, Office Unit 2B, Office Unit 3, Ancillary Unit, Loading Dock Unit,
Destination Retail Access Unit, and any units resulting from the subdivision or combination of any Unit, as provided in the By-Laws are herein sometimes
called collectively the “Units” and individually a “Unit”. The owner of a Unit is hereinafter sometimes called a “ Unit Owner”;
(1) A Unit shall not include any Common Elements located therein or any Facilities, plumbing, electrical, HVAC work, machinery, or other
materials and equipment used exclusively by and for the benefit of other Units or Unit Owners.
(m) While the street address of the Building as of the recording of this Declaration is 501 West 30 th Street, New York, New York 10001, each
Unit Owner or Sub-Board (as defined in the By-Laws) on behalf of any Units created by a subdivision of a Unit may arrange with the applicable
governmental authorities and/or the United States Postal Service for its Unit to have a different address. If a Unit has an identifying name (for marketing
purposes or otherwise), the Unit Owner owning such Unit shall be free to use such name, subject to the provisions of Section 7(h) hereof.
5. Dimensions of Units. (a) As shown on the Floor Plans, each Unit consists of the area measured horizontally from the exterior face of
exterior walls to the applicable demising line of any Exclusive Use Common Elements or General Common Elements within a Unit, including concealed metal
studs, blockwork, columns and mechanical pipes and ducts that are in the interior walls, or center line of partitions separating one Unit from another Unit, or
Unit side face of partitions at corridors, stairs, elevators and other mechanical equipment spaces. Each Unit consists of the area measured vertically from the
top of the concrete floor (below any flooring materials) to the underside of the concrete ceiling. Any Common Elements located within any Unit shall be
considered part of that Unit for purposes of measurement only.
(b) Each Unit consists of the space designated on the Floor Plans as part of such Unit together with those Facilities which exclusively serve or
benefit such Unit or Unit Owner thereof, including, without limitation, all security systems, fire safety systems, plumbing, air conditioning and heating
fixtures and equipment, including, without limitation, perimeter heating enclosures, ventilating equipment, exhaust fans, domestic hot water heating
equipment, air conditioning units, and other fixtures and appliances as may be affixed, attached or appurtenant to such Unit. Plumbing, air conditioning and
heating fixtures and equipment as used in the preceding sentence shall include, without limitation, exposed water pipes attached to fixtures, appliances and
equipment and the fixtures, appliances and equipment to which they are attached, and any special pipes or equipment which a Unit Owner may install within
a wall or ceiling, or under any floor, but shall not include water or other pipes, conduits, wiring or ductwork within the walls, ceiling or floors or mechanical
systems that are described as General Common Elements. Each Unit shall also include the interior partitions (including, without limitation, glass partitions),
interior glass, window frames, all lighting and electrical fixtures and appliances within the Unit and any special equipment, fixtures or Facilities (including,
without limitation, elevators and their shafts, pits, slab openings, overruns and mechanical rooms, escalators) affixed, attached or appurtenant to the Unit to
the extent located within a Unit and serving or benefiting only that Unit.
4