AMD 1996 Annual Report Download - page 93

castings, structural steel, steel plate, exchangers, condensers, coolers,
insulation, paint, welding rod, instruments, instrument charts, pumps, motors,
compressors, generators, furnaces, air conditioning, ventilating, fans,
transformers, conduit, wiring, switch gear, panel boards, hoists, tube cleaners,
wrenches, fire extinguisher, and the like.
1.6.3 The term "PERSON" where used herein shall mean an individual,
corporation, association, partnership, joint venture, limited liability company,
trust or other business entity or government or governmental agency, court,
department or officer.
1.6.4 The term "REASONABLE PERIOD OF TIME" when used herein in
connection with any testing by, or any consent or approval of COMPANY shall mean
a period of time equal to ten (10) working days or, if the circumstances then
prevailing require a longer period of time, COMPANY will justify to CONTRACTOR
such longer period of time in which COMPANY may commence its testing or grant or
deny its consent or approval.
1.6.5 The term "REPRESENTATIVE" when used herein shall mean a person
designated by one of the parties hereto as its representative and authorized to
represent or act on behalf of, and to make decisions that are binding on, the
party such person is representing for the purposes for which such person has
been appointed and when used herein as applying to COMPANY, for purposes of
inspection and approval of Construction Work, shall include any person
representing or acting on behalf of any lender of COMPANY. A person designated
as a representative for a limited purpose, e.g., to conduct audits, shall not be
---
a representative for any other purpose. COMPANY'S Representatives shall include
any independent Person retained by COMPANY to implement financial and cost
controls or to examine and advise COMPANY regarding financial or cost matters.
1.6.6 Expressions such as "SERVICE THE FACILITY" and "SERVICING THE
FACILITY" where used herein shall be understood as requiring or referring to the
performance of such work as is normally needed to recondition the equipment for
resuming operation after a shutdown thereof as, for example, routine purging,
unplugging, cleaning or plating up of equipment; installing fresh operating
supplies; making such routine pressure tests as are needed before resuming
operation; and the like.
1.6.7 The term "SITE BOUNDARY LINES" where used herein shall be
understood to refer to the boundaries of the Site designated as such in the
Contract Documents.
1.6.8 The term "SUBCONTRACTOR" where used herein shall mean a
corporation, association, partnership, joint venture, limited liability company,
trust or other business entity or individual (other than an employee) who
contracts with CONTRACTOR (or with any subcontractor) to (i) perform part of
CONTRACTOR'S work, whether at the Site or elsewhere, or (ii) furnish materials
for the Facility and also erect or install same at the Site.
1.6.9 The term "SUPPLIES" where used herein shall mean those goods or
commodities which enter into the construction of the temporary structures or
temporary lines that are needed at the Site in connection with work on the
Facility, and goods or commodities of a rapidly consumable nature that are used
by the mechanical or building trades at the Site for work on the Facility.
1.6.10 The term "SYSTEM" where used herein shall include, without
limitation (i) a functionally related group of elements, such as a group of
interacting mechanical or electrical components such as the ultra pure water
system or the HVAC system for the Fab and Clean Room, or (ii) a structurally
related group of elements, such as a building.
7
Source: ADVANCED MICRO DEVIC, 10-K, March 20, 1997