AMD 2004 Annual Report Download - page 444

Schedule 7
Requirements of Return Condition
If the Lessee returns all or any of the Units to the Lessor pursuant to Article 25 of the Lease Agreement, it shall fulfill all the requirements below in addition to
the provisions of Article 25 of the Lease agreement except for those as previously specified by the Lessor in writing as not required.
When Lessee returns the Equipment pursuant to Clause 25 of the Lease, Lessee shall satisfy the following conditions, in addition to the conditions
specified in Clause 25 of the Lease.
(A) Lessee shall no later than 180 days prior to the expiration or other termination of the lease (with regard to all but not less than all Equipment) provide,
at its expense:
1. a detailed inventory of the Equipment (including the model and serial number of each major component thereof), including, without limitation, all
internal circuit boards, module boards, and software features
2. a complete and current set of all manuals, blue prints, process flow diagrams, equipment configuration diagrams, operation, maintenance and
repair records and other data (in English) reasonably requested by Lessor concerning the configuration and operation of the Equipment, and
3. a certification of the manufacturer or of a maintenance provider acceptable to Lessor that the Equipment (a) has been tested and is operating in
accordance with manufacturer’s specifications together with a report detailing the condition of the Equipment, the results of such test(s) and inspection(s) and all
repairs that were performed as a result of such test(s) and inspection(s), and (b) that the Equipment qualifies for the manufacturer’s used equipment maintenance
program.
(B) Upon the request of Lessor and at the expense of Lessee, Lessee shall, not later than 180 days prior to the expiration or other termination of the Lease
make the Equipment available for on-site operational inspection by persons designated by the Lessor who shall be qualified to inspect the Equipment in its
operational environment.
(C) At the expense of Lessee, all Equipment shall be cleaned and treated with respect to rust, corrosion and appearance in accordance with manufacturer’s
recommendations and consistent with the best practices of dealers in used equipment similar to the Equipment in accordance with the applicable and relevant
environmental laws, rules and regulations. At Lessor’s option and at the expense of Lessee, Lessee shall (a) properly remove all Lessee installed markings which
are not necessary for the operation, maintenance or repair of the Equipment; or (b) translate said markings to a language as specified by Lessor and reattach those
markings.
32
Source: ADVANCED MICRO DEVIC, 10-K, March 01, 2005